PHOENIX - 2989365 - Electronic Modem - ICDC-040168 - New

PHOENIX – 2989365 – Electronic Modem – ICDC-040168 – New

Main Category: Electronics | Sub-Category: Modem | Status: New Original Components
PHOENIX Part Number: 2989365 | ICDC Internal Part Number: ICDC-040168

2989365 Description:

Industrial Ethernet Switch – FL NAT SMN 8TX
2989365
Switch Smart Managed Narrow NAT con otto porte RJ45 da 10/100 MBit/s e funzione 1:1-NAT-Router
Description
The FL NAT SMN 8TX is the first product in the Phoenix Contact range that combines the functions of a NAT router (NAT = Network Address Translation) and a switch in one device. The NAT switch is suitable for almost any use in automation applications with a compact enclosure compatible with the control cabinet, thebook factor.
The port on which NAT conversion occurs in the higher-level network is port 1. Ports 2 to 8 of the managed switch are used for the lower-level network. FL NAT SMN 8TX can be configured via a webserver or via SNMP ( Simple Network Management Protocol).
The FL NAT SMN 8TXit is the first combined device that combines the switch mechanism (on the Layer2 level) with routing (on the Layer3 level). If in the past two devices were required and therefore double the width for the installation and a double price for the acquisition, the FL NAT SMN 8TX is a highly functional device at a very attractive price.
The switch functions incl. portmirroring, LLDP or redundancy mechanisms enable standard and powerful data communications on seven 100 MBit / s LAN ports.
Machine manufacturers very often have the problem of equipping their machines with an IP address space that can be reintegrated into their customers’ IT network. With the FL NAT SMN 8TXit is possible to equip individual machines or systems with the same IP addresses all the time and then convert these IP addresses into higher-level corporate network IP address ranges required by the applications. This functional block is usually referred to as Network Address Translation – NAT.

Length 57 mm
Height 133 mm
Depth 130 mm
Color gray-aluminum
Mounting type Rail mounting
Ethernet
Connection RJ45
Note on the type of connection Autonegotiation and autocrossing
Transmission speed 10/100 MBit / s
Transmission physics Copper
Transmission length 100 m (per segment)
Signaling LED Power supply, data transmission, errors, links, activity
Number of channels 8 (RJ45 ports)
Serial (RS-232)
Connection RS-232-C, 6-pole MINI-DIN female connector (PS / 2)
Guy Book execution
Product type Switch
MTTF 349.06 Years (Standard SN 29500, temperature 25 ° C, duty cycle 21%)
185.83 Years (Standard SN 29500, temperature 40 ° C, operating cycle 34.25%)
46.86 Years (Standard SN 29500, temperature 70 ° C, duty cycle 100%)
Switch functions
Diagnostic functions RMON History
LLDP (Link Layer Discovery Protocol)
SNMP-Traps
Basic functionality Store and forward IEEE 802.3 2 compliant switch, priority classes according to IEEE 802.1 P TCP / IP protocol, BootP, integrated Web Server function, Rapid Spanning Tree (RSTP), router, 1: 1-NAT router
Control voltage signaling contact 24 V DC (typ.)
Control current signaling contact 600 mA (max.)
Conformance class PROFINET Conformance-Class A
Filter functions VLAN (up to 32 VLANs)
Management Web based Management (HTTP)
SNMP v1 / v2
Redundancy Rapid Spanning Tree Protocol (RSTP)
FRD (Fast Ring Detection)
Large Tree Support
STP (Spanning Tree Protocol)
MRP (Media Redundancy Protocol)
Status and diagnostic indications LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and Activity / Speed / Duplex switchable)
Supported browsers Internet Explorer from version 5.5
Other functions Routing (1: 1 NAT, Virtual NAT, Routing)
BootP
DHCP client
Security functions
Dynamic Host Configuration Protocol (DHCP) Support Client / Relay Agent
Basic functionality Store and forward IEEE 802.3 2 compliant switch, priority classes according to IEEE 802.1 P TCP / IP protocol, BootP, integrated Web Server function, Rapid Spanning Tree (RSTP), router, 1: 1-NAT router
Link Layer Discovery Protocol (LLDP) According to 802.2 protocol
Network Time Protocol (NTP) Client Client
Routing NAT, 1: 1-NAT, Virtual NAT
Absorbed power 14.5 W
Local diagnostics US1, US2 supply voltage US1, US2 Green LED
FAIL div. Red LED
LINK Link status Green LED
ACT / MODE Receive / send telegrams Green LED
SPD / MODE Data transmission speed Green LED
FD / MODE Duplex mode Green LED
Maximum power dissipated in nominal conditions 14.4 W
Test voltage 500 V DC
Verification test for one minute 500 V DC
Transmission medium Copper
Diet
Supply voltage 24 V DC (redundant)
Supply voltage range 18 V DC … 32 V DC
Power connection Using COMBICON, conductor cross section max. 2.5 mm²
Residual ripple 3.6 V PP (within the allowable voltage range)
Max. Absorbed current 600 mA
Typical absorbed current 600 mA (with U S = 24 V DC)
Function
Control voltage signaling contact 24 V DC (typ.)
Control current signaling contact 600 mA (max.)
Degree of protection IP20
Ambient temperature (operation) 0 ° C … 55 ° C (non-condensing)
Ambient temperature (storage / transport) -40 ° C … 85 ° C
Permissible air humidity (operation) 5% … 95% (non-condensing)
Permissible air humidity (storage / transport) 5% … 95% (non-condensing)
Vibrations (operation) according to IEC 60068-2-6: 5g, 10 Hz … 150 Hz
Air pressure (operation) 86 kPa … 108 kPa (2000 m on NN)
Air pressure (transport and storage) 66 kPa … 108 kPa (3500 m NN)
Compliance with EMC directives IEC 61000-4-2 (ESD) Criterion A
IEC 61000-4-3 (electromagnetic fields) Criterion A
IEC 61000-4-4 (Burst) Criterion A
IEC 61000-4-5 (Surge) Criterion A
IEC 61000-4-6 (immunity to induced disturbances) Criterion A
Electromagnetic compatibility Compliance with the EMC directive 2014/30 / EU
Noise emission EN 61000-6-4: 2007 + A1: 2011
Noise immunity EN 61000-6-2: 2005
Status reporting LEDs: US1, US2 (power supply), Fail (alarm contact), 2 LEDs per Ethernet port (Link and Activity / Speed / Duplex switchable)
Item number 2989365
Pieces / pack. 1 Piece
Minimum order quantity 1 Piece
Sales code DNN131
Product code DNN131
Catalog page Page 420 (C-6-2017)
GTIN 4046356456074
Weight per piece (including packaging) 846 g
Weight per piece (excluding packaging) 650 g
Customs tariff number 85176200
Country of origin DE
ECLASS
ECLASS-9.0 19170106
ECLASS-10.0.1 19170401
ETIM
ETIM 7.0 EC000734
UNSPSC
UNSPSC 21.0 43222612
China RoHS Intended use period without damage to the environment (EFUP): 50 years
Information on hazardous substances can be found in the manufacturer’s declaration underDownloads

Contact us to discover 2989365. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Electronics section to discover more about ICDC catalog: a large selection of industrial spare parts including Fuses, Electric Motors, Switches and Modem.
Are you looking for industrial Modem? ICDC offers online a wide selection of Modem of the most important OEMs like EATON, ABB and DANFOSS, besides PHOENIX.

ICDC, Your Industrial One Stop Shop for Components!