SICK - DBS36E-BBEP01024 - Electronic Encoders - ICDC-040657 - New

SICK – DBS36E-BBEP01024 – Electronic Encoders – ICDC-040657 – New

Main Category: Electronics | Sub-Category: Encoders | Status: New Original Components
SICK Part Number: DBS36EBBEP01024 | ICDC Internal Part Number: ICDC-040657

DBS36E-BBEP01024 Description:

Incremental encoders DBS36 Core
Type: DBS36E-BBEP01024
Part no.: 1066378
Pulses per revolution 1,024
Measuring step 90° electric/pulses per revolution
Measuring step deviation ± 18° / pulses per revolution
Error limits ± 54° / pulses per revolution
Duty cycle ≤ 0.5 ± 5 %
Interfaces
Communication interface Incremental
Communication Interface detail HTL / Push pull
Number of signal channels 6-channel
Initialization time < 3 ms
Output frequency ≤ 300 kHz
Load current ≤ 30 mA
Power consumption ≤ 0.5 W (without load)
Electrical data
Connection type Cable, 8-wire, with male connector, M12, 8-pin, universal, 0.5 m
Supply voltage 7 … 30 V
Reference signal, number 1
Reference signal, position 90°, electric, logically gated with A and B
Reverse polarity protection ✔
Short-circuit protection of the outputs ✔ 1)
MTTFd: mean time to dangerous failure 600 years (EN ISO 13849-1) 2)
1) The short-circuit rating is only given if Us and GND are connected correctly.
2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design Blind hollow shaft
Shaft diameter 8 mm 1)
Weight + 150 g (with connecting cable)
Shaft material Stainless steel
Flange material Aluminum
Housing material Aluminum
Material, cable PVC
Start up torque + 0.5 Ncm (+20 °C)
Operating torque 0.4 Ncm (+20 °C)
Permissible shaft movement, axial static/dynamic ± 0.5 mm / ± 0.2 mm 2)
Permissible shaft movement, radial static/dynamic ± 0.3 mm / ± 0.1 mm 2)
Operating speed 6,000 min⁻¹ 3)
Maximum operating speed ≤ 8,000 min⁻¹ 4)
Moment of inertia of the rotor 0.8 gcm²
Bearing lifetime 2 x 10^9 revolutions
Angular acceleration ≤ 500,000 rad/s²
1) Order collets for 5 mm, 6 mm and 1/4” mm separately as accessories.
2) Higher values are possible using limited bearing life.
3) Allow for self-heating of 4.7 K per 1,000 rpm when designing the operating temperature range.
4) No permanent operatio

Contact us to discover DBS36E-BBEP01024. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Electronics section to discover more about ICDC catalog: a large selection of industrial spare parts including Fuses, Electric Motors, Switches and Encoders.
Are you looking for industrial Encoders? ICDC offers online a wide selection of Encoders of the most important OEMs like EATON, ABB and DANFOSS, besides SICK.

ICDC, Your Industrial One Stop Shop for Components!