PHOENIX - 2866226 - Electronic Modules - ICDC-040155 - New

PHOENIX – 2866226 – Electronic Modules – ICDC-040155 – New

Main Category: Electronics | Sub-Category: Modules | Status: New Original Components
PHOENIX Part Number: 2866226 | ICDC Internal Part Number: ICDC-040155

2866226 Description:

Uninterruptible power supply – QUINT-DC-UPS / 24DC / 10
2866226
Uninterruptible power supply of 24 V DC / 10 A, with integrated 1.3 Ah accumulator. In the download area, among other things, there is a clear selection table with load currents and buffer times but also with the charging times after buffer operation.

DC operation
Input voltage 24 V DC
Input voltage range 22.5 V DC … 30 V DC
Extended range input no
DC input voltage range 22.5 V DC … 30 V DC
Voltage type of the supply voltage A.D
Backup time 1.5 min. (10 A)
20 min. (2 A)
Current consumption ca. 0.1 A
0.5 A (Charging procedure)
10.5 A (max.)
Fixed connection threshold <22 V DC
Variable connection threshold (U IN – 1 V) / 0.1 s
Input fuse 15 A (delayed, internal)
Efficiency > 91%
Nominal output voltage 24 V DC (Normal operation: U in – 0.5 V DC, buffer operation: 27.9 to 19.2 V DC)
Rated output current (I N ) 10 A
Coverage time 2 min.
Short circuit resistant Yes
Power output 240 W
Dissipated power 20 W
8 W
Parallel connection no
Possibility of connection in series Yes
Network operation
Nominal output voltage 24 V DC
Rated output current (I N ) 10 A
Battery operated
Nominal output voltage 24 V DC
Rated output current (I N ) 10 A
Signal
Description of the output Power OK
Signal: potential-free
Description of the output Alarm
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Charge
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Mode
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal
Description of the output Power OK
Signal: potential-free
Description of the output Alarm
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Charge
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Mode
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal
Description of the output Power OK
Signal: potential-free
Description of the output Alarm
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Charge
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Mode
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal
Description of the output Power OK
Signal: potential-free
Description of the output Alarm
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Charge
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Signal: potential-free
Description of the output Battery Mode
Max. Switchable voltage ≤ 30 V AC / DC
Permanent load current ≤ 1 A
Nominal capacity 1.3 Ah
Nominal capacity range 1.3 Ah
Battery life module 6 Years (20 ° C)
Delayed commissioning (battery only) 9 Months (20 ° C … 30 ° C)
6 Months (30 ° C … 40 ° C)
Storage medium internal, 1.3 Ah battery
Disposal Do not dispose of old batteries in household waste, follow the respective national regulations in force.
Network management Yup
Entrance
Connection Removable screw terminal
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 7 mm
Thread M3
Exit
Connection Removable screw terminal
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Stripping length 7 mm
Thread M3
Signal
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12
Thread M3
Min torque 0.5 Nm
Max torque 0.6 Nm
Types of reporting LED
Operating voltage indication Green LED
Signal output
Status reporting GreenPower OKLED
Note regarding the status indicator Power OK: LED on permanently
Signal output: potential-free
Status reporting Red LED
Note regarding the status indicator Alarm: LED on permanently
Signal output: potential-free
Status reporting Flashing yellow LED
Note regarding the status indicator Battery Charge: Flashing LED
Signal output: potential-free
Status reporting Yellow LED
Note regarding the status indicator Battery Mode: LED on permanently
Input / output insulation voltage 2 kV (Testing)
4 kV (approval)
Product type DC UPS
Disposal Do not dispose of old batteries in household waste, follow the respective national regulations in force.
MTBF (IEC 61709, SN 29500) > 500000 h
Features of insulation
Protection class II (in closed electrical panel)
Length 100 mm
Height 130 mm
Depth 125 mm
Mounting dimensions
Left / right mounting distance 5 mm / 5 mm
Top / bottom mounting distance 50 mm / 50 mm
Mounting type Rail mounting
Assembly instructions side-by-side: 0 mm horizontal, 50 mm vertical
Installation position Horizontal support rail NS 35, EN 60715
Color aluminum
Housing material Metal
Housing material AluNox (AlMg1)
Environmental conditions
Degree of protection IP20
Ambient temperature (operation) 0 ° C … 50 ° C
Ambient temperature (storage / transport) 0 ° C … 40 ° C
Maximum permissible air humidity (operation) 95% (at 25 ° C, no condensation)
Regulatory reference – Electronic equipment for use in power installations EN 50178 / VDE 0160 (PELV)
Electrical safety according to law EN 60950-1 / VDE 0805 (SELV)
EN 61558-2-17
Safe separation according to law DIN VDE 0100-410
Standard – Safety of transformers EN 61558-2-17
Homologation for the naval sector DNV GL (EMC A), ABS
UL approvals UL / C-UL Listed UL 508
UL / C-UL Recognized UL 60950-1
UL / C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D
Conformity / Approvals
SIL according to IEC 61508 0
Performance Level according to ISO 13849 absent
Low Voltage Directive Compliance with the LVD directive 2014/35 / EC
Electromagnetic compatibility Compliance with the EMC directive 2014/30 / EU
Noise emission EN 55011 (EN 55022)
Noise immunity EN 61000-6-2: 2005

Contact us to discover 2866226. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Electronics section to discover more about ICDC catalog: a large selection of industrial spare parts including Fuses, Electric Motors, Switches and Modules.

Are you looking for industrial Modules?

ICDC offers online a wide selection of Modules of the most important OEMs like EATON, ABB and DANFOSS, besides PHOENIX.

ICDC, Your Industrial One Stop Shop for Components!