PHOENIX - 2813538 - Electronic Equipment - ICDC-040153 - New

PHOENIX – 2813538 – Electronic Equipment – ICDC-040153 – New

Main Category: Electronics | Sub-Category: Equipment | Status: New Original Components
PHOENIX Part Number: 2813538 | ICDC Internal Part Number: ICDC-040153

2813538 Description:

Galvanic Isolators – MINI MCR-SL-IU-4
2813538
MCR 3-way galvanic isolator, for galvanic isolation of analog signals, screw connection, input: 4 mA … 20 mA, output: 0 V … 10 V

Restriction of Use
EMC note EMC: Class A product, see the manufacturer’s declaration in the download area
Product type Isolation amplifier
Number of channels 1
Features of insulation
Overvoltage category II
Degree of pollution 2
Number of channels 1
Galvanic isolation Basic insulation according to EN 61010
Galvanic isolation between input and output Yes
Limit frequency (3 dB) ca. 100 Hz
Maximum power dissipated in nominal conditions 434.3 mW
Response time (10-90%) » 3.5 ms
Maximum thermal coefficient <0.01% / K
Typical thermal coefficient <0.002% / K
Transmission error ≤ 0.1% (of full scale)
Galvanic isolation Input / output / power supply
Rated insulation voltage 30 V AC
50 V DC
Test voltage 1.5 kV AC (50 Hz, 60 s)
Diet
Nominal tension 24 V DC
Supply voltage range 19.2 V DC … 30 V DC (Use the bus connector for bridging the supply voltage (ME 6.2 TBUS-2 1.5 / 5-ST-3.81 GN, Art.No. 2869728) , can be snapped onto the 35 mm mounting rail according to EN 60715)
Max. Absorbed current <9 mA
Absorbed power <200 mW
Signal: Current input
Number of entrances 1
Configurable / Programmable no
Input signal, current 4 mA … 20 mA
Input signal, maximum current 50 mA
Current input input resistance ca. 50 Ω
Signal: Voltage
Output denomination Voltage output
Number of outputs 1
Configurable / Programmable no
Output signal, voltage 0 V … 10 V
Output signal, maximum voltage 12.5 V
Short-circuit current ca. 2 mA
Load / load output voltage output ≥ 10 kΩ
Ripple <20 mV SS
<20 mV SS (at 10 kΩ)
Connection Screw connection
Stripping length 12 mm
Thread M3
Rigid conductor section 0.2 mm² … 2.5 mm²
Flexible conductor section 0.2 mm² … 2.5 mm²
Conductor cross section AWG 26 … 12
Quoted design
Length 6.2 mm
Height 93.1 mm
Depth 101.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 – HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 – HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 – HL 2
Case material PBT
Environmental conditions
Degree of protection IP20
Ambient temperature (operation) -20 ° C … 65 ° C
Ambient temperature (storage / transport) -40 ° C … 85 ° C
Elevated position ≤ 2000 m
Permissible air humidity (operation) 5% … 95% (non-condensing)
THERE IS
Certificate CE conformity
UKCA
Certificate UKCA compliance
UL, USA / Canada
Marking UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T4
Homologation for the naval sector
Certificate DNV GL TAA000020N
DNV GL data
Temperatures B.
Humidity B.
Vibration B.
EMC TO
Enclosure Required protection according to the Rules shall be provided upon installation on board
Electromagnetic compatibility Compliance with the EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2
Note Interference can cause slight deviations.
Electrostatic discharges
Standards / Provisions EN 61000-4-2
Electrostatic discharges
Remarks Take measures against electrostatic discharge.
High frequency electromagnetic fields
Name High frequency electromagnetic fields
Standards / Provisions EN 61000-4-3
Typical difference from the final value of the measuring range 5%
Fast transients (Burst)
Name Rapid transient disturbances (Burst)
Standards / Provisions EN 61000-4-4
Typical difference from the final value of the measuring range 5%
Surge current load
Standards / Provisions EN 61000-4-5
Surge current load
Remarks Criterion B
Influence conducted
Name Interferences
Standards / Provisions EN 61000-4-6
Typical difference from the final value of the measuring range 5%
Galvanic isolation Basic insulation according to EN 61010
Mounting type Rail mounting
Assembly instructions The DIN rail bus connector can be used for bridging the supply voltage, which can be snapped onto the 35 mm DIN rail in accordance with EN 60715.
Installation position of your choice

Contact us to discover 2813538. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Electronics section to discover more about ICDC catalog: a large selection of industrial spare parts including Fuses, Electric Motors, Switches and Equipment.

Are you looking for industrial Equipment?

ICDC offers online a wide selection of Equipment of the most important OEMs like EATON, ABB and DANFOSS, besides PHOENIX.

ICDC, Your Industrial One Stop Shop for Components!