PHOENIX - 1513761 - Electrical Connectors-Contactors - ICDC-040113 - New

PHOENIX – 1513761 – Electrical Connectors-Contactors – ICDC-040113 – New

Main Category: Electrical | Sub-Category: Connectors-Contactors | Status: New Original Components
PHOENIX Part Number: 1513761 | ICDC Internal Part Number: ICDC-040113

1513761 Description:

Flush-mounting connector – SACC-EC-M12FS-8CON-PG9 / 0,5
1513761 PHOENIX
Sensor / actuator flush socket, 8-pin, M12, A-coded, front / screw mounting with Pg9 thread, placeable, with 0.5 m TPE wire, 8x 0.25 mm 2
Note for operation The electrical and mechanical data indicated require a pair of connectors correctly locked and mounted. If the connector is in the unlocked state and there is a danger of pollution, the connector must be closed with a protective cap> IP54. Also take into account the influences via wires, lines or mounting on the cs
Product type Circular connectors (device side)
No. poles 8
Number of cable outlets 1
Shielded no
Coding TO
Features of insulation
Overvoltage category II
Degree of pollution 3
Degree of protection IP67
Degree of protection IP67
Ambient temperature (operation) -25 ° C … 85 ° C (female connector / connector)
-40 ° C … 85 ° C (without mechanical drive)
-25 ° C … 85 ° C (Cables, mobile laying)
-40 ° C … 85 ° C (cables, fixed installation)
Maneuver cycles > 100
Connection 1
Head structure Recessed female connector
Head cable outlet right
Head thread type M12
Head locking type Standard
Coding TO
Connection 2
Head structure free conductor end
Impulsive dimensioning voltage 0.8 kV
Mass resistivity ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Rated voltage U N 30 V (AC)
30 V (DC)
Rated current I N 2 A
Combustion class according to UL 94 V0
Gasket material NBR
Handle material Die-cast zinc, nickel-plated
Contact material CuZn
Contact surface material Ni / Au
Contact insert material PA66
Screw material Zinc die-cast, nickel-plated
Conductor connection
Connection Single wires
Contact type Crimp contacts
Conductor section 0.25 mm²
Mounting type Front mounting Pg9 with nut
Assembly instructions with nut
M12
Standards / regulations IEC 61076-2-101
Cable length 0.5 m
Cable structure
Cable type TPE wire
Signal type / category Universal
Conductor material Tinned Cu wire
Line signal conductor structure 14x 0.15 mm
AWG signal line 24
Wire insulation material TPE
Wall thickness insulation 0.21 mm (Wire insulation)
Wire diameter with insulating sheath 1.15 mm ± 0.07 mm
Single conductor, color brown, blue, white, gray, pink, green, yellow, red
Electrical characteristics
Nominal cable voltage 300 V
Cable test voltage 2000 V AC
Conductor resistance ≤ 80 mΩ / m
Line insulation resistance ≥ 20 MΩ * km
Environmental conditions
Ambient temperature (operation) -40 ° C … 85 ° C (cables, fixed installation)
-25 ° C … 85 ° C (Cables, mobile laying)

Contact us to discover 1513761. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Electrical section to discover more about ICDC catalog: a large selection of industrial spare parts including Fuses, Electric Motors, Switches and Connectors-Contactors.

Are you looking for industrial Connectors-Contactors?

ICDC offers online a wide selection of Connectors-Contactors of the most important OEMs like EATON, ABB and DANFOSS, besides PHOENIX.

ICDC, Your Industrial One Stop Shop for Components!