EATON - NZM1-XRAVR - Electromechanical Circuit Breakers | ICDC-041656

EATON – NZM1-XRAVR – Electromechanical Circuit Breakers | ICDC-041656

Main Category: Electromechanical | Sub-Category: Circuit Breakers | Status: New Components in Original Box
Manufacturer: EATON | Part Number: NZM1XRAVR | ICDC Part Number: ICDC-041656
Lead Time: 2 Days to Shipping + DHL Express Transit Time

NZM1-XRAVR Description:

NZM1-XRAVR – Drive, rear, 3p, lockable, red
107249
SUPPLY PROGRAM
Assortment
Accessories
accessories
Rear drive
Standard/Approval
UL/CSA, IEC
Size
NZM1
Description
For direct, rear mounting of the switch on the wall or on the door of the control cabinet.
Rear operation of the switch through the wall or door of the electrical cabinet.
For toggle switches
Degree of protection
IP66, UL/CSA Type 4X, Typ12
use with
NZM1, N1, NS1, PN1
Padlockability
padlockable in position 0 on the handle with max. 3 padlocks
Note
Insertable external danger warning plate.

Not in connection with a semi-extractable connector system or remote control.

Not in connection with auxiliary contact/voltage release with terminals on the left side of the circuit breaker

DESIGN CHECKS ACCORDING TO IEC/EN 61439
IEC/EN 61439 design checks
10.2 Suitability of materials and components
10.2.2 Corrosion resistance
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.3.1 Envelope resistance to heat
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.3.2 Resistance of insulating materials to normal heat levels
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.3.3 Resistance of insulating materials to extraordinary heat levels
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.4 Resistance to UV radiation
The requirements of the product standard are met.
10.2 Suitability of materials and components
10.2.5 Lifting
Not relevant since the entire electrical panel must be evaluated.
10.2 Suitability of materials and components
10.2.6 Impact test
Not relevant since the entire electrical panel must be evaluated.
10.2 Suitability of materials and components
10.2.7 Wordings
The requirements of the product standard are met.
10.3 Degree of protection of enclosures
Not relevant since the entire electrical panel must be evaluated.
10.4 Airborne and surface dispersion routes
The requirements of the product standard are met.
10.5 Protection against electric shock
Not relevant since the entire electrical panel must be evaluated.
10.6 Flush mounting of appliances
Not relevant since the entire electrical panel must be evaluated.
10.7 Internal circuits and connections
It falls under the responsibility of the manufacturer of the electrical panel.
10.8 Connections for conductors introduced from the outside
It falls under the responsibility of the manufacturer of the electrical panel.
10.9 Insulation characteristics
10.9.2 Dielectric strength at power frequency
It falls under the responsibility of the manufacturer of the electrical panel.
10.9 Insulation characteristics
10.9.3 Impulse withstand voltage
It falls under the responsibility of the manufacturer of the electrical panel.
10.9 Insulation characteristics
10.9.4 Verification of casings made of insulating material
It falls under the responsibility of the manufacturer of the electrical panel.
10.10 Heating
The calculation of overheating is the responsibility of the manufacturer of the electrical panel. Eaton provides data on equipment dissipation.
10.11 Short-circuit resistance
It falls under the responsibility of the manufacturer of the electrical panel. Respect the default values of the equipment.
10.12 EMC
It falls under the responsibility of the manufacturer of the electrical panel. Respect the default values of the equipment.
10.13 Mechanical function
For the device, the requirements are met by observing the instructions in the assembly instructions (IL).
TECHNICAL DATA ACCORDING TO ETIM 8.0
low voltage electrical appliances (EG000017) / Handle for protection switch (EC000229)
Ar. Technique, Electr., Energy, Techn. Electric engineering, automation, process control engineering / Low-voltage switching technology / Power switches (Ns, < 1 Cv) / Handle for operating units ([email protected] [AKF012014 ]) with restart interlock no With key lock no locking with padlock Yes color red suitable for emergency stop Yes with axis Yes suitable for circuit breaker Yes suitable for load switch Yes type of protection (NEMA) 4X, 12 APPROVALS Product Standards UL489; CSA-C22.2 No. 5-09; IEC60947, CE marking UL File No. E140305 UL Category Control No. DIHS CSA File No. 022086 CSA Class No. 1437-01 North America Certification UL listed, CSA certified Degree of Protection IEC: IP66, UL/CSA Type 4X, 12
Contact us to discover more about the Circuit Breakers by EATON code NZM1-XRAVR

Are you looking for EATON industrial components?

ICDCSPARES.COM offers new and overhauled original components, ready in stock to be shipped via DHL Express! Call us!

Check our Circuit Breakers section to discover more about ICDC catalog: a wide selection of industrial spare parts, including Compressors, Flow Control Valves, UPS and Rotary Joints, besides Circuit Breakers. ICDC offers online a wide selection of Electromechanical industrial components of the most important OEMs like EUGEN SEITZ, BECKHOFF, SKF, COPELAND and ALFA LAVAL beyond EATON.
ICDC,
Your Industrial One Stop Shop for Components!