CONTROL TECHNIQUES - UNI2402, UNIDRIVE series - Driver - ICDC-041017 - New

CONTROL TECHNIQUES – UNI2402, UNIDRIVE series – Driver – ICDC-041017 – New

Main Category: Electronics | Sub-Category: Drivers | Status: New Original Components
CONTROL TECHNIQUES Part Number: UNI2402 | ICDC Internal Part Number: ICDC-041017

UNI2402 Description:

The Control Techniques Unidrive UNI2402 is a 7.5kW, 380…480V AC AC drive.

Named Unidrive because of its universal nature, the drive can operate in five modes including Open Loop V/F Control, Open Loop Space Vector Control, Closed Loop Flux Vector Control, Servo and Regeneration. The drive can be configured in minutes for a variety of industry standard applications thanks to its pre-configured application parameter sets known as MACROs. Although it has since been replaced by the Unidrive SP, the original Unidrive gave users the benefits of simplicity, ease of use and flexibility.

Mains dip ride through Frequency slaving. Catch a spinning motor Eight preset speeds/accelerations/decelerations Injection and dynamic breaking S-ramp profiling. Coast and ramp to stop modes. Three skip frequencies with adjustable bandwiths. Speed reference sequencer.

Key Benefits: More Power, the best power to size ratio available, minimising panel costs Unidrive uses the same options throughout the complete power range for maximum flexibility. More Performance Advanced auto-tuning facility enables Unidrive to dramatically increase the motor shaft performance whilst offering the user quieter motor operation. Get the maximum performance for your application thanks to the Unidrive’s Intelligent Thermal Modelling.

Excellent Flux Vector drive performance due to the enhanced control algorithms. Easy to Use the 7.5kW Unidrive is extremely easy to configure thanks to the pre-configured parameter sets, which are also known as MACROs. You can also view and edit parameter values quickly and easily using the Unisoft commissioning software and get your motor turning in minutes with the quick start guide. Multiple drive set up is also made easy due to the optional cloning module which enables the user to copy parameters. The pre-configured parameter sets (MACROs) include: general Purpose Easy Mode Motorised Potentiometer Preset Frequencies/Speeds Torque Control PID Control Axis Limit Control Brake Control Electrical Gearbox. A Variety of Options: The Unidrive is suitable for a selection of applications thanks to the vast amount of options that make the series so flexible. Plug in communications options, feedback modules and interfaces are just some of the types of options this 7.5kW VFD supports.

Options include:

MC Filters Extended I/O (UD50) Second Encoder (UD51) Sin/Cos Encoder (UD52) Resolver Feedback (UD53) Cloning Module (UD55) Applications Module (UD70) Modbus (UD70) Serial Communications (UD71) Profibus-DP (UD73) Interbus S (UD74) CTNet (UD75) Modbus Plus (UD76) DeviceNet (UD77) CAN interface High performance servo (UD78) Unisoft Commissioning Software Universal Keypad CTIU Operator Interface Manufacturer Control Techniques Width (mm) 190 Range Unidrive Range type Variable Speed Drive Application High Performance / HVAC Fan & Pump Input Phase Three Phase / Triphas? Input Supply Voltage 380…480V AC Amp Rating (Constant Torque) 16 Power KW (Constant Torque) 7.5 Depth (mm) 200 Height (mm) 335 Keypad Yes IP Rating IP00 Logic (PNP/NPN) Positive (PNP) / Negative (NPN) Loop Open / Closed No Analog Outputs 2 No Digital Outputs (dedicated) 3 No Analog Inputs 3 No Digital Inputs 3

Contact us to discover UNI2402. ICDCSPARES.COM offers new or overhauled original components, ready in stock to be shipped via DHL Express! Call us!
Check our Electronics section to discover more about ICDC catalog: a wide selection of industrial spare parts including Fuses, Electric Motors, Switches and Modules.

Are you looking for industrial Modules?

ICDC offers online a wide selection of Modules of the most important OEMs like EATON, ABB and DANFOSS, besides CONTROL TECHNIQUES.

ICDC, Your Industrial One Stop Shop for Components!